Giroform® Starter-Kit

Giroform introductory equipment in the Giroform Starterkit. The combination of well coordinated aids and the availability of the accessory required is part of the accuracy; and the introduction of the technicians in charge of model fabrication by a competent AmannGirrbach consultant as well as after-sales service, too.

The Giroform Starterkit 576702 comprises enough material for 100 models as well as all aids required in connection with the Pin Drill and the Giroform model.

 

Art. 576702 Giroform Starterkit



Giroform Base Plates

Shape-retaining acrylic base plates. Level side towards the dental arch, and splitcast profile with magnetic plate (Premium) towards the articulator. Before casting, impression and base plate are matched by means of the plate reception and the impression carrier. The individual die positions are transferred 1:1 onto the base plate, and the pins are fixed in the drill holes. Only then, it is lowered into the plaster mush. Thus, the setting expansion is stopped at the saw cut.

  • Ideally dimensioned basis: half of the model is already finished!
  • Dense, homogeneous material structure, neat shavings
  • Solid plate thickness and smooth drilling wall for safe pin guidance
  • Level surface, identical drilling depths, controlled die rest
  • Eliminates both expansion phases, that of the dental arch and of the plinth
  • Sharp splitcast presentation, scientifically proven design
  • Removable magnetic connection to the articulator ensures also prefect reposition
  • Precise, neat, and priceworthy model - the business card of the lab



Giroform Base Plates

Art. 576745 Premium XL



Giroform Base Plates

Art. 576720 Classic L



Giroform Base Plates

Art. 576740 Classic XL



Giroform Base Plates

Art. 576726 Classic L blue

 



Giroform Secondary Plate

Acrylic plate with negative splitcast profile. For tight adaptation of the base plate. No direct contact with articulating plaster.

  • Passively adapting; a magnet allows removal and exact reposition
  • Disturbance-free occlusion thanks to fine tactile control

Art. 576750 Giroform Secondary Plate with Magnet, 50 pcs.



Giroform Putty

Permanently soft, yellow silicone putty for adding around the

periphery of the impression and for blocking out. Saves plaster and

saves time normally required for trimming and grinding the model.

 

Art. 576461 Giroform Putty 1 kg

Art. 576465 Giroform Putty 5 kg



Giroform Pins

Art. 576450 Giroform-Pins, 1.000 pcs.



Giroform® base/silicone sleeves

For fabricating master models and utilizing previously used

Giroform base plates. The vestibular walls of the dual-purpose

sleeve are wider above the upper edge of the base plate. This

creates space for incorporating any soft tissue areas up to the

mucolabial fold that are included in the impression and are

required for the restoration.

 

Art. 576950 Giroform base/silicone sleeves L-Combi

Art. 576961 Giroform base/silicone sleeves XL



Giroform Duplication Flask

For the duplication of dies varying in size from single segments up to the complete dental arch. Suitable for Giroform base plate L. Two removable segment wings determine the duplication area and, thus, the material consumption.

  • Non-distorting, "water-tight" model adaptation to the flask
  • Freely variable segmentation, from single die up to the complete dental arch
  • Enough labial space allowing the integration of protruding anterior teeth
  • Low material consumption, perfect results

Art. 576670 Duplication Flask



Giroform® ceramic pins

Removable conical ceramic pins, inserted into the base plate,

are used in refractory duplication. They can be accurately repositioned

on the original model after firing.

 

Art. 576490 Double conical pin, alu 250 pcs.

Art. 576480 Refractory pin, ceramic, 25 pcs.



Space retainer foil

Provides enough space for pins and magnet. Stabilizes the base plate in the area of the splitcast profile

 

Art. 576805 space retainer foil 50 pcs.



Tungsten carbide burr

high quality carbide pin burrs (ensure

precise drill-holes and long-time service)

 

Art. 176710 Tungsten carbide burr



Mandrel for arbor bands

50/Pkg. - ISO 070 - length 11 mm

 

Art. 815300 Mandrel for cylinder (1/Pkg.)

Art. 815310 Grit 80

Art. 815330 Grit 120

Art. 815340 Grit 240



Giroform Quadrant Base Plate

Acrylic plate with negative splitcast profile. For tight adaption of the base plate. No direct contact with articulating plaster.

 

-Passively adapting; a manget allows removal and exact reposition

-Disturbance-free occlusion thanks to fine tactile control

 

Art. 576770 Giroform Quadrant Base Plate, 100 pcs.

Art. 576771 Giroform adjustment plate for Quadrant, 2 pcs.



Giroform Adapter for Vertex®

This fast and versatile adapter allows the Giroform base plates to be used with disposable articulators.

 

Art. 576790 Giroform adapter for Vertex® articulators, 100 pcs.



Giroform Magnets and Sockets

Magnet Ø 31.9mm, including socket and retention disc. Allowing removal of the model and reposition in the articulator. Independent system use.

  • Reasonable costs for single and multiple packages of 100 pcs.

Art. 512500 Magnets with Sockets and Retention Disks

Art. 512511 Giroform Magnets, 100 pcs. (fig. 1)

Art. 512512 Giroform Sockets, 100 pcs. (fig. 2)

Art. 576640 M8-Magnetic plates 50 pcs. (fig. 3)

Art. 576650 M8-Magnetic plates 100 pcs. (fig. 4)

Art. 576716 Magnetic plate incl. screw for Giroform Classic, 100 pcs. (fig. 5)